Causes and solutions of oil leakage of worm gear reducer

Causes and solutions of oil leakage of worm gear reducer

　　There are many reasons for the oil leakage of the worm gear reducer, but the main reasons for the leakage are the following reasons:

　　The first cause of oil leakage is that the oil is added too much. If the oil is added too much, the machine itself will be unstable when the reducer is running. If the oil is added too much, it will definitely follow the machine's shaking. Splash

　　The second reason for the oil leakage of the worm gear reducer is that the normal maintenance is not good, and the dirt remains due to the improper maintenance, so that the sealing performance of many seals is not good, so that the oil will leak due to the shaking of the machine itself during use;

　　The third reason is that the pressure caused by the difference between the internal and external pressures forces the oil to leak.The reason for the pressure is that the temperature of the reducer will increase due to the friction of the machine gears during use, and the resulting pressure will cause the oil to leak from some very small slits. This is best

Don't leave the machine running for a long time during use, and be sure to remove the dirt during maintenance.

　　The oil leakage of the worm gear reducer is mainly due to the above reasons. Some people also say that the structure of the machine itself is not good, and it will also leak. There are defects in the machine structure.

.