China Model 355 / 400 Centre Distance Worm Series Double Enveloping Worm Gear Worm Gearbox with Hot selling

Product Description

Model 355 / 400 Centre Distance Worm Sequence Double Enveloping Worm Gear Worm Gearbox

Merchandise Description

Collection C  double enveloping worm gear
Design: 100 – 500
Ratio: 10 -63
Output Torque : 683 – 51180 N.m
Ranking Electricity : 47/25HP(1.41Kw) – 597HP(448Kw)

one, High torque double enveloping worm gear modify toughest working condition .
two,Common design double enveloping worm gearbox.
3, Smooth and noiseless procedure double worm gearbox.
four, Larger driving efficiency than traditional worm gear.
five, Escalating loading capability .
six, Rigorous quality test ahead of shipping
seven, Tailored design and style for various application
8, Long daily life service period
nine,appropriate cost with moderated
ten, reasonable cost & large top quality

In a Worm Gearbox, Worm Reduction Equipment Box, Worm Velocity Reducer and Gear Motor Maker, three to eleven equipment enamel are typically in make contact with with the worm, depending CZPT the ratio. The increased quantity of pushed equipment teeth that are in get in touch with with the worm considerably raises torque capacity also raises shock load resistance. In addition to increasing the variety of driven gear teeth in make contact with with the worm, Worm Gearbox, Worm Reduction Equipment Box, Worm Speed Reducer and Gear Motor Maker also will increase the make contact with area on each gear tooth. The true areas of instantaneous get in touch with in between the worm threads and the driven gear tooth are strains. These lines of speak to go throughout the encounter of the equipment tooth as it progresses by way of its complete time of mesh with the worm. The strains of get in touch with in double-enveloping worm gearing are configured to improve the energy transmission capacity and lessen the stress on each and every equipment tooth.

Doing work situations

Two shafts for ninety ° Intersect, input speed need to not be a lot more than 1500 rpm.The working environment temperature should range from  0 ~ forty ° C, when the setting temperature underneath ° C or earlier mentioned forty ° C.Before starting the lubricating oil to corresponding heating and cooling, The worm shafts, reverse operation can be good.

Information sheet on CUW double enveloping worm equipment reducer :

Edge: 
The advantage of CZPT Higher Efficiency, Minimal Noice Cone Worm Sequence Worm Gearbox design and style are spectacular. First, the complete load is divided between much more individual equipment enamel, and the load is further divided where enamel help 2 strains of get in touch with. This superior load distribution significantly boosts load carrying capacity. Second, the improved torque throughput permits a smaller sized reducer to create the very same amount of torque, ensuing in size and bodyweight personal savings.
Double-enveloping worm gearing can have loads that would demand a lot greater and heavier cylindrical worm gearing.

Delivery :                                                                                               

According to Customer prerequisite, we shipping and delivery goods by distinct transport, Sea shipping, Air Transportation / Categorical or Truck transportation and so forth.

You Appoint, We Services!

Our Providers

With all our actions DNV-ISO 9001, SGS -accredited, we stand for best-high quality support. Entrusting your gearboxes to the care of our Services.

Support protect your gearbox from put on and grinding, SGR gearbox converts torque reliably and effi­ciently.
We customize our CZPT planetary gear units, double enveloping worm gearbox, helical gear motor, modular layout helical gear unit, worm gearbox, cycloidal gearbox and so on to suit your application and fulfill your wants. 

These characteristics allow a reliable and protected services daily life of in excess of 200 000 operational hours. 

Our customers have been putting their have confidence in in CZPT gear models because 1997. Far more than 500 000 gear models of our gearbox are in use reliably close to the globe, in several circumstances underneath really harsh conditions.

###

###

###

###

###

###

###

###

Advantages and disadvantages of worm gear reducer gearbox

If you are looking for a worm gear reducer gearbox, you have come to the right place. This article will cover the pros and cons of worm gear reducer gearboxes and discuss the different types available. You will learn about multi-head worm gear reducer gearboxes, hollow shaft worm gear reducer gearboxes as well as hypoid gear sets and motors.

Hollow shaft worm gear reducer gearbox

Hollow shaft worm gear reducer gearboxes are used to connect two or more rotating parts. They are available in single-axis and dual-axis versions and can be connected to various motor types. They can also have different ratios. The ratios of these gear reducer gearboxes depend on the quality of the bearings and assembly process.
Hollow shaft worm gear reducer gearboxes are made of bronze worm gears and cast iron hubs. The gears are lubricated with synthetic oil. They are lightweight and durable. They can be installed in various engine housings. Additionally, these gear reducer gearboxes are available in a variety of sizes. The range includes 31.5, 40, 50, 63, and 75mm models. Other sizes are available upon request.
In addition to worm gear reducer gearboxes, there are also helical gear reducer gearboxes. These reducer gearboxes can achieve very low output speeds. They are also suitable for all-around installations. In addition, the advantage of a multi-stage reducer gearbox is that it is more efficient than a single-stage gear reducer gearbox. They also feature low noise, low vibration, and low energy consumption.
Hollow shaft worm gear reducer gearboxes are generally less expensive and last longer. They are also a suitable replacement for solid shaft gearboxes for machines that require high torque without compromising strength. Typical gear arrangements include worm, spur, helical and bevel gears. Gear ratio is the ratio of input torque to output torque.

Multi-head worm gear reducer gearbox

The multi-head worm gear reducer gearbox is used to reduce the speed of the machine. It uses friction to hold the worm in place while transmitting power. These gears can also be called ground worms and hardened worm gears. They are useful in conveying systems and most engineering applications.
Multiple worm reducer gearboxes have a large number of gear ratios. These gear designs have a central cross-section that forms the front and rear boundaries of the worm gear. This design is a better choice than other worm gears because it is less prone to wear and can be used with a variety of motors and other electronics.
Adjustable multi-head worm gear reducer gearbox to reduce axial play. Usually, the backlash on the left and right sides of the worm is the same. However, if you need less backlash, you can buy a double lead worm gear. This design is ideal for precision applications requiring small clearances. The lead of the opposing teeth of the double worm gear is different from the right side, so the backlash can be adjusted without adjusting the center distance between the worm gears.
Worm gear reducer gearboxes are available from a variety of manufacturers. Many gear manufacturers stock these gears. Since the gear ratios are standardized, there is no need to adjust the height, diameter, or length of the shaft. Worm gears have fewer moving parts, which means they require less maintenance.

Hypoid Gear Set

Worm gears are the most common type of gear. While these gears are great for high-to-low ratios, hypoid gear sets are much more efficient in all ratios. This difference is due to higher torque density, better geometry and materials, and the way hypoid gears transmit force differently than worm gears.
Hypoid gear sets have curved helical teeth. This results in smooth gear meshing and little noise. This is because the hypoid gears start to slowly contact each other, but the contact progresses smoothly from tooth to tooth. This reduces friction and wears, thereby increasing the efficiency of the machine.
The main advantages of hypoid gears over worm gears are higher torque capacity and lower noise levels. Although their upfront cost may be higher, hypoid gears are more efficient than worm gears. They are able to handle higher initial inertia loads and can deliver more torque with a smaller motor. This saves money in the long run.
Another advantage of hypoid gears is the lower operating temperature. They also do not require oil lubrication or ventilation holes, reducing maintenance requirements. The hypoid gear set is maintenance-free, and the grease on the hypoid gear set lasts for decades.

Hypoid gear motor

A hypoid gear motor is a good choice for a worm gear reducer gearbox as it allows for a smaller motor and more efficient energy transfer. In fact, a 1 hp motor driving a hypoid reducer gearbox can provide the same output as a 1/2 hp motor driving a worm reducer gearbox. A study by Agknx compared two gear reduction methods and determined that a hypoid gear motor produces more torque and power than a worm reducer gearbox when using a fixed reduction ratio of 60:1. The study also showed that the 1/2 HP hypoid gear motor is more energy efficient and reduces electricity bills.
Worm reducer gearboxes run hotter than hypoid gears, and the added heat can shorten their lifespan. This can cause components to wear out faster, and the motor may require more frequent oil changes. In addition, hypoid gear motors are more expensive to manufacture.
Compared to worm gears, hypoid gears offer higher efficiency and lower operating noise. However, they require additional processing techniques. They are made of bronze, a softer metal capable of absorbing heavy shock loads. Worm drives require work hardening and are less durable. Operating noise is reduced by up to 30%, and hypoid gears are less prone to breakage than bevel gears.
Hypoid gear motors are prized for their efficiency and are used in applications requiring lower torque. A unique hypoid tooth profile reduces friction. In addition, hypoid gear motors are ideal for applications where space is limited. These geared motors are often used with pulleys and levers.

R series worm gear reducer gearbox

R series worm gear reducer gearboxes have a variety of characteristics that make them ideal for different applications. Its high rigidity cast iron housing and rigid side gears are designed for smooth drive and low noise. It also features high load capacity and long service life. Additionally, it can be assembled into many different configurations as required.
High efficiency, large output torque and good use efficiency. It comes in four basic models ranging from 0.12KW to 200KW. It can be matched with right angle bevel gearbox to provide large speed ratio and high torque. This combination is also suitable for low output and high torque.

AGKNX Electric Worm Gear reducer gearbox

AGKNX Electric worm gear reducer gearboxes are available with NEMA C-face mounting flanges for a variety of motors. These reducer gearboxes feature double lip oil seals, an aluminum alloy housing, and two bearings on the input and output shafts. These reducer gearboxes are rust-proof and have epoxy paint on the inside. They are available in a variety of ratios, from 7.5:1 to 100:1.
Worm reducer gearboxes are one of the most cost-effective and compact gears. These reducer gearboxes increase output torque while reducing input speed. AGKNX Electric’s worm gear reducer gearboxes are pre-installed with Mobil SHC634 Synthetic Gear Oil. These reducer gearboxes have an internal oil gallery guide to protect the shaft. They also have a one-piece cast iron housing.
AGKNX Electric Corporation is the leading independent distributor of electric motors in the United States. They have eight strategically located warehouses, enabling them to ship most orders on the same day. They offer motors of various sizes up to 20,000 hp. They also offer a variety of motor controls and variable speed drives.

editor by CX 2023-04-12