small worm gearbox

Small Precison Worm Reduction Gearboxes
There are many of specifications you will need to consider when coming up with a worm gearbox selection.
First, what’s the insight and output torque requirements? Next, examine vendor horsepower/torque charts and pick the correct worm equipment reducer.
If how big is the gearbox is going to be an important consideration after that check the reducer dimension specifications, not all manufacturers make compact units. In fact, small worm gearbox working with the right supplier will help you not merely find the right gear reducer but also avoid some of the most common errors in reducer selection. We offer a free guide to assist you find the right supplier to utilize.
For low and fractional horsepower application we offer two sizes of worm equipment reducer, the SW-1 and the SW-5. Size and torque output are the major distinctions between both of these models. Both feature the hollow or solid result shaft. Both versions are compact and provide users a wide variety of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specs of your particular application or task is essential to selecting the right worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Little precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped installation holes at the top and bottom
• Flush fitting bearing caps easy to install
• Input shafts installed on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capacity of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Right Angle Worm Gear Motors Used
Anywhere a concise dual shaft gear motor or single shaft gear motor is necessary. This right angle gear motor is indeed versatile it could work just about anywhere.
Features & Options
Double Shaft or Single Shaft
Hollow Shaft
Maximize Torque in a little Package
Wide Gear Ratio
Cost-Effective
Compact Size
Specifications
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using miniature gears, Ever-Power provides designed and built exclusive, high precision mini gearboxes that can’t be found anywhere else. Our miniature gearboxes can be found in many configurations, which includes worm and wheel, cross axis helical, bevel, inline spur, and more. We are able to also provide customized micro gearboxes that were created and built to meet your specific specifications.
E mail us for the mini gearbox the application requires, or request a quote on a customized micro gearbox.
Micro Gearbox Options
Gearboxes are also called reducers, gear reducers, rate reducers, equipment drives, and gearmotors. All terms can be used pretty much interchangeably. Please be aware that the links for our small gear drives include info on the full range of framework sizes for that series or design.
Bevel Box Micro Equipment Drive
Our bevel box miniature equipment drives are app rated for the ideal balance of efficiency and cost. Torque could be balanced to meet your RPM and operating life requirements. Lightweight with low backlash performance (as little as 1°, with option of 1/2”).
Result torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input boosts to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power miniature cross axis helical gearboxes provide relatively high levels of thrust in a concise package. They offer an result shaft at 90° from the input, and are available in gear ratios from 1:1 to 40:1. Lightweight but durable, with machined aluminum housings and hardened alloy metal gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: only ≤30 arc minutes
Rated for input boosts to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc moments of backlash or better. Also called “shaft to bore gearboxes,” these devices provide a single input shaft that protrudes from opposite sides of the housing; output is usually a keyed bore. Standard solitary- and double-end shafts can be found and supplied with keys and retainer bands. An array of equipment ratios and input sizes can be found to meet your preferences.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Available in ratios from 5:1 to 120:1
Rated for input boosts to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened steel gears, solid aluminium housings, and long lasting lubrication. They offer two input shafts on opposing sides of the frame, with two output shafts perpendicular to the input shafts. Our mini 4 shaft worm gear drives deliver high performance performance with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: less than ≈2°
Available with equipment ratios from 1:1 to 32:1
Rated for input speeds up to 4,000 RPM
Miniature Flange Worm Equipment Drive
These micro flange worm gearboxes produce an output at 90° from the input. They deliver superior efficiency in an amazing array applications and are constructed with small footprints, making them ideal for procedures where space is bound. They offer high efficiency with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: only ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specifically engineered for encoder applications, Ever-Power’ micro inline spur gear drives can be found in two frame sizes, and so are rated for speeds up to 3,000 RPM. Aluminium housings and stainless gears and shafts make these inline spur gearboxes difficult and corrosion resistant, for your the majority of demanding applications.
Output torque: up to 125 oz.-inches
Low backlash: as little as 15 arc minutes
Available with gear ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature correct angle worm gear reducers deliver superior performance with high efficiency, and feature rugged building for challenging power transfer procedures. Available in three gear ratios (5:1, 10:1, 20:1), our small worm gearboxes are built in extremely compact footprints for applications where space is bound.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Compact footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power can engineer and produce a custom miniature gearbox to meet your unique specs. We can produce customized micro gearboxes in any configuration the application requires, with output torque levels as high as 900Nm. We are able to work from your own gearbox styles, reverse engineer a preexisting unit, or assist you to develop an all-new style that provides the performance you need. Demand a quote on a custom miniature gearbox or e mail us to discuss your unique requirements.
The Ever-Power Advantage: Little is No Big Problem
Broadest selection of small gear reducers
Greased for life
Ruggedly built
Modifications and particular ratios available
Custom small gearboxes designed to suit
Input & Output Shafts
Input and result shafts with drive essential and retainer rings could be supplied to your specifications for any of our hollow bore miniature gearboxes. We provide a basic selection of one ended or dual ended shafts to assemble in these gearboxes. All gearbox shafts are supplied with keys and retainer rings.
For P and PF series worm and wheel gearboxes make use of our P/PF gearbox shafts.
For Electronic series crossed axis helical gearboxes use our Electronic gearbox shafts.
For F series spur gearboxes, contact our program engineers to discuss your particular needs.
We offer a broad selection of misalignment shaft couplings in in . and metric bore sizes. In . and metric precision floor shafts can be found from stock.
Contact Us for POWERFUL Miniature Gearboxes
We are the miniature gearbox specialists. Our micro gear drive versions deliver superior overall performance in a small footprint, and are tough enough for challenging function environments. E mail us to learn more about our mini gearboxes, or demand a quote on a customized model that is tailored to your needs.
Additional advantages of worm drive gearboxes include: