worm motor

Worm travel gearbox with motor
worm motor
A robust worm-travel gearbox powered by an MM28 engine. Ideal applications where a simple to match, high torque output is required. Great for student based tasks which includes robots and buggies.
The machine has been designed to ensure that the output shaft can be ‘clicked’ in and out for modification. Electronic.g. reducing to size. The engine is snap installed into its cradle to activate the gear and worm.
Details
1 – 6V DC
0.1A to 1A depending on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + motor: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the motor isn’t turning. The high equipment ratios of 216:1 or 336:1 get this to gearbox appropriate for little strolling robots, lifting mechanisms, and various other applications where high torque is desired.
The low-voltage motors in the worm gearbox run on 1.5-4.5 volts and draw up to a few amps, making them ideal applicants for the DRV8833 motor driver carrier. Electric motor overheating can be caused by excessive stalling, even at very low voltages. We recommend that you use stall-detection sensors, or just see your robot, to ensure that it doesn’t stall for more than a few seconds at a time.
This gearbox has a 4 mm diameter, round output shaft, which works together with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also matches on the smaller threaded end of the shaft, though it is not specifically designed to work with this type of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right angle worm geared motors arranged new criteria for reliability, efficiency and economic climate with unparalleled features which includes hollow shafts in the tiniest sizes. An inverter friendly style provides for easy integration right now and a really future proof remedy. The Ever-Power gear electric motor offers total flexibility in mounting options includes shaft, base, encounter, and flange alternatives. The motor terminal box could be mounted in substitute positions rotated in 90º steps around the electric motor frame offering for unparalleled integration options.
Ever-Power gear motors adhere to UNITED STATES and International requirements, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a true total solution for our global customers.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose proof,and can be used outside or in wet and dusty conditions without the use of additional enclosures. Complete rated output is available at the output shaft of the machine.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change initial after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Additional features:
Connecting with Plug connectors.
With included inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the solution for applications requiring a good part turn, optional dual result, or perhaps an inability for the electric motor to be back again driven. The DC correct angle gear motors are made for continuous and intermittent duty procedure. Our right angle gear reducers were created with a number of mounting plate choices, making them perfect for a number of DC electric motor based applications. You can expect 12 ratios ranging from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Standard brush life of 2000+ time (varies by application)
EP Products Worm Equipment Motors are created to generate high torque in a small package size. Worm Gear Motors are great for applications that want a personal- locking or breaking characteristic since the result shaft can’t rotate when there’s no power applied. Additionally, Worm Gearheads can transfer motion in 90 degrees. With various decrease ratios, precision minimize gears, voltages and sizes, EP Items includes a DC Worm Equipment Motor solution for your application.
Features and Benefits
Very High Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Equipment Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Security Door Locks / Industrial Conveying Systems / Security Gates / Oral Seats / Ambulance Cots & Stretchers Quite a few DC Motors can be complimented with among our Worm Gearheads. EP Products will work with you to design and produce a Worm Gear Engine which will optimize the efficiency of your unique application.
Built to your unique requirements
Electric motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Trim / Round / Splined / Other)
General Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Additional Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm engine runs on the metal gear box for durability and a high torque output. Because of the special mechanical structure of the worm get the motor output shaft can be self locking and will not be rotated.
This part runs on the two wire connection and supports direction control along with PWM speed control. Rated voltage is 12v and can obtain 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear systems from EP DRIVESYSTEMS especially show their strength in applications where high gear ratios are necessary. Our worm geared motors happen to be as a result optimally suited for use in intralogistics, packaging technology and the food & beverage industry.
Four great reasons for EP worm geared motors:
Rugged
Our worm geared motors have a higher overload capacity
Maintenance Friendly
Washdown versions enable simple and effective cleaning of the drive system.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical, corrosion and abrasion resistant.
Flexibility
Our modular design give users optimum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are many applications that want drive systems, and each one of these has its unique requirements. The EP series worm equipment motors could be quickly and effectively adapted to satisfy your needs.
Worm gear models impress with their superior power density and compact style. If required, we are able to also source them with the impressive nsd tupH surface treatment.
As well as the basic EP housing, we offer an extensive line of bolt-on elements to customize the product including torque arms, shaft addresses and output flanges. These could be easily field installed, but we will also be happy to assemble the average person components for you.
Discover more about our modular SI worm geared motors!
Find out more
Smooth and Tidy: The EP worm gear unit SMI
SMI worm gear products feature a even, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface area conversion makes the product preferably suited for harsh and challenging industries like meals processing and pharmaceuticals.
Adaptable input designs such as NEMA, IEC or direct motor mounts in extra foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared engine program. The units possess on all sides unique repairing possibilities and enable an easy assembling for the customer.
Additional drive configurationscan be created by use of built-in components (e.g. torque arm and output flanges). The housings are created in light weight structure out of aluminium die cast. Engine attachment is realised generally by way of IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:output shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm
Buy Worm Drive Gearbox with Motor – incorporating the following features: 1 to 6V voltage ranking, 17100 rpm simply no load quickness, 220g-cm stall torque, 3mm shaft size, 60mm long, 35mm huge, 40mm high, a good robust worm drive gearbox powered by an MM28 motor (included), most suitable for applications where an easy to match, high torque productivity is necessary, nylon housing and gear, requires light oil or silicon grease lubrication, ideal for student based projects including robots and buggies.
Most suitable for applications where an easy to fit, high torque end result is required
Ideal for student based projects including robots and buggies
Reversible High torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Reversible Large torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Features:
The electric motor is Gear DC motor with micro-turbine worm, you can transform the wiring-connection to change motor rotation.
Turbo worm geared electric motor with self-lock, that is, regarding motor without electric, the result axis is fixed, self-lock.
The reducer output shaft arranged vertically with the engine shaft, whole engine output shaft relatively-short than general gear electric motor, widely used to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Result torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the windowpane, door, Mini winch. Ect.
In sumo robot or combat robot competition where excessive holding torque’s electric motor is essential to avoid your robot being pushed by your opponent robot. The worm gear is definitely an improved option when compared to spur gear motor. How come worm gear so special? Check this wiki out: Worm Travel.
“Unlike with ordinary equipment trains, the direction of transmission (insight shaft vs result shaft) isn’t reversible when working with large reduction ratios, due to the better friction involved between your worm and worm-wheel, when usually a single start (1 spiral) worm is used. This can be an advantage when it is desired to remove any possibility of the output driving the input.”
In other terms, it is challenging to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Output shaft is self-locking because of the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g