Our worm equipment reducers offer an option of a good or hollow result shaft and feature an adjustable mounting position. Both SW-1 and the SW-5, however, can withstand shock loading much better than other lowering gearbox designs, making them perfect for demanding applications.
Rugged compression-molded glass-fill up polyester housing
Light weight and compact
Non corrosive
Non metallic
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Grease Lubrication
Stable or Hollow output shaft
Adjustable mounting position
Worm Gear Quickness Reducers is rated 5.0 out of 5 by 1.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Used on 
Both Shaft Ends
Anti-Rust Primer Applied Inside and Outside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Models for 56C and 145TC Motors
Our regular 700 Series – the heart of EP Gear’s velocity reducer product line – has been serving industry reliably for over 40 years. Its verified modular style has set the industry standard for overall performance and may be the most imitated merchandise in the current worm gear quickness reducer market. But why accept a knock-off when you’re able to have the initial – from EP Gear.
Specifications
11 basic one reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow output shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in share)
Product Features
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for for a longer time operating life.
Its multi-position mounting versatility allows for installation in practically any position.
Housings are straddle-milled, best and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure confident, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides optimum strength for maximum durability, and also greater precision during worm and gear alignment.
EP Gear’s 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures capacity for excessive torque and overhung loads.
Pipe plugs allow convenient fill up, level, and drain in practically any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal life.
Both 2D and 3D CAD drawings are available in our eCatalog.
GEARBOX REDUCERS
Right angle gearboxes (worm and planetary) are tough and built for 90° turns. Inline reducers (parallel shaft and planetary) will be an ideal meet for motors with high insight speeds, or when gearmotor performance is important. Get in touch with our technical sales personnel for help identifying which gearbox alternative is best for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm gear reducers were created with a hollow bore and invite for a corner turn with optional dual result. The reducers come in 12 ratios which range from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our right angle gearboxes were created with five mounting options providing versatility when incorporating the reducer into item.
RIGHT ANGLE BEVEL GEARBOX
bevel-right-angle-gearbox
The proper angle bevel gearbox combines the features of our correct angle worm and planetary inline reducers. With a solid and efficient correct angle configuration, our right angle planetary gearboxes offer a robust solution. The right angle bevel gearbox comes in 18 ratios which range from 5:1 to 1000:1, in fact it is back-drivable at all ratios.
INLINE REDUCERS
I-SERIES PLANETARY GEARBOX
i-series-planetary-gearbox
Our I-Series small planetary gearbox configurations provide the smallest footprint and quietest operation of our swiftness reducers. These gearboxes are made to handle varying loads with little backlash. With body sizes 52cm, 62cm, and 81cm, 12 ratios which range from 5:1 to 308:1, we have a solution to fit your needs. Our 52 frame size is also available with plastic-type material gears for noise-delicate applications.
INLINE PLANETARY GEARBOX
inline-planetary-gearbox
Our inline planetary gearbox configurations supply the highest performance and best result torque of most our swiftness reducers. These gearboxes are created to handle varying loads with small backlash. Planetary equipment reducers operate even more quietly than parallel shaft reducers. With 18 ratio choices which range from 5:1 to 1000:1, we’ve a solution to fit your needs.
PARALLEL SHAFT GEARBOX
parallel-shaft-gearbox
Parallel shaft gearboxes will be the top choice for continuous duty applications. Their equipment cluster design provides a highly effective method for dissipating high temperature. Parallel shaft gearboxes possess the shortest amount of our inline gear reducer options therefore they work very well in conditions with limited space. Our parallel shaft equipment reducers provide an affordable drop-in replacement solution for most little parallel shaft gearmotors.
Wormwheel gearboxes go by several names, including 90-degree gearboxes, right angle gearboxes, speed reducers, worm equipment reducers and worm travel gearboxes. Gear reduction boxes include a gear arrangement when a equipment in the form of a screw, also referred to as a worm, meshes with a worm gear. These gears are typically made from bronze and the worms will be steel or stainless steel.
While worm gears act like a spur equipment, the worm gearboxes are considerably smaller than other gear reduction boxes. A main benefit of worm equipment reducers is that they create an output that is 90° from the insight and can be used to transmit higher torque or decrease rotational speed. Frequently, a worm gearbox offers right hand threads; to change the direction of the output, a left-hand thread worm gearbox is necessary.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Equipment Reducer 10:1 Ratio
We have actually greatly researched worm reduction gearbox to bring you the most accurate details feasible.